TAC AB, 2001-08-08 0-004-7506-4 (EN), 27 (36)
TAC Xenta OP Handbook 4 Dialogs with TAC Xenta 300 and 401
To get to the next schedule controlling AH02 press once.
AH02: Time schedule
1234567
08:00–12:00 S
As the cursor is positioned under “08”,
must be pressed twice to
move the cursor to “12”. Use
+
and
–
to change the off hour to
“13”. Press
once and adjust the minutes.
When finished, press
after the last entry and then use to
return to the previous menu level.
Holiday chart The week schedule can be modified by a Holiday chart which defines
conditions for certain dates, for example when Christmas Eve occurs
on a workday:
AH02: Holiday chart
1234567
14:00–17:00 MTWTF
**-12-24 : **-12-24
The asterisks (**) act as “wild card”, that is, the date will in this case
be valid each year.
Use
+
and
–
to change the time and date values. Use to
move the cursor between the fields. To obtain asterisks in the date
fields, toggle the month value past 12. To obtain asterisks for the year
value, you must toggle backwards from the value 94.
When finished, press
after the last entry and then use to
return to the previous menu level.
The Holiday chart is valid throughout the 24 hours.
Note, for example the following case:
Week schedule says active 08:00-18:00
Holiday chart says active 00:00-00:01
The object will be active for the one minute only.
To Next Page
Loading...
Need help?
General