RWP Weighing Indicator Technical Manual(v1.16)
Note: When you change the weighing unit this saved values will be clear.
Accumulated Total
Manually, the scale can be set to accumulation by pressing key , when an
optional printer is connected. See details in F4 Prt.
Memory Recall
When display of Zero, you can see the number of weighing and total
weight by pressing key , display will be shown for two seconds.
Memory Clear
When display of Zero, you can see the number of weighing and total
weight by pressing key , display will be shown for two seconds.
Press key during this display. The memory data are deleted and
display will be shown
5.10. Accumulation Automatically
In this function the individual weighing values are automatically added
into the memory. No need to press any keys.
For this function, set to parameter F4 Prt and select P AutO.
After select this function, display indicator AUTO will be shown.
Place the goods on the platform to be weighed
After the stable, will be follow beep sound twice.
Unload the goods, the weighing value will be saved automatically and will
be follow beep sound once.
It can continue the process until the maximum capacity or value.
5.11. Animal Weighing
RWS can use for vibrate loads.
For this function, set to parameter P4 CHk to ModE 2
After select this function, display indicator ANIMAL will be shown.
To Next Page
Loading...
Need help?
General
