T Scale RWP - 6. PARAMETERS; Menu Operations and Navigation; Parameter Block Overview; Entering Programming Mode

RWP Weighing Indicator Technical Manual(v1.16)
- 16 -
6. PARAMETERS
KEYS OPERATIONS INTO THE MENU
Enter the menu
 In weighing mode, press key and key together.
Select the menu
 Press key, it can change the menu block one by one.
 Using increase the digit.
Enter the selected menu
 Press key , it can confirm, which will be shown displayed.
Change the digit
 Press key , it can change the active digit.
Return to weighing mode
 Press key , exit from the menu.
Enter into Prog
When display shows Prog , press and keys to enter the
function