T Scale RWP - 8. CALIBRATION; Normal Calibration Procedure; Entering Calibration Mode

RWP Weighing Indicator Technical Manual(v1.16)
- 21 -
7. CALIBRATION
 In weighing mode, press key and key together.
 Press key continuous until display will be shown.
 Press key, display will be shown.
 Enter the password. Press , and keys
Display will be shown
 Press key , display will be shown.
 Enter the function by pressing , display will be shown
 Select option or or
 Enter the function by pressing
 Press continuous until display will be shown.
 Enter the function by pressing , display will be shown
Normal Calibration:
 Enter the function by pressing key , display will be shown
 Make sure there are no loads on the platform and wait few seconds for
stable indicator on.
prog
Fo h-l
pin
P1 ref
P 2 cal
Nonlin
unload
Sig ra
cal
Nonlin
Sig ra
dua ra
Dua in