TA Q Series User Manual

TMA Q Series Getting Started Guide
48
Replacement Parts
Replacement parts for the TMA that are available from TA Instruments. See the table below when ordering
parts.
Part Number Description
944200.901 Standard TMA Accessory Kit
consisting of:
944122.901 Expansion Probe Assembly
944126.901 Penetration Probe Assembly
944123.901 Macro-Expansion Probe Assembly
944120.901 Sample Stage
900902.901 Indium Calibration Standard
940070.000 Aluminum Calibration Standard
942057.000 Teflon
®
Demonstration Sample
259537.000 Forceps
259522.000 Set Weights
203947.005 3/32 Hex Wrench
269792.001 Wave Washers
944205.001 Thermocouple Retainer
Optional Accessory Kits
944201.901 Film/Fiber Accessory Kit consisting of:
944121.901 Film/Fiber Sample Stage
944128.901 Film/Fiber Probe Assembly
941038.901 Vial Cleaved Aluminum Balls
944047.901 Film Clamp Assemblies
944144.001 Film Clamp Fixture
269789.001 Jeweler’s Screwdriver (0.080 inch)
269793.001 Film Clamp Screws (#0 - 80)
944014.001 Automeasure Gauge
944202.901 Dilatometer Accessory Kit consisting of:
944124.901 Dilatometer Probe Assembly
941143.000 Dilatometer Sample Vials
941148.901 Vials Filling Medium
941022.901 Vial Aluminum Calibration Standards
944203.901 Flexure Accessory Kit consisting of:
944127.901 Flexure Probe Assembly
941054.000 Flexure Sample Platform
(table continued)

TA Q Series Specifications

General

Brand	TA
Model	Q Series
Category	Measuring Instruments
Language	English