tae TA-U110

Appendix 2 3/5 Subject to technical change!
Parameters
Group selection
The parameters on the U-drive are divided into several groups.
Use the keypad to first select the group and then open it to view and, if necessary, change the
parameters it contains.
Key
Action
One group up (min. Group 01)
One group down (to max. number of groups)
Open group
Exit menu (>> main menu)
1.
EEPROM, SMC a. EZU
2.
motor data
3. drive data
4.
maschine data
5. speed/current
6.
ramps
7. control dynamics
8. digital I/O
9.
analog I/O
10. PLC I/O
11.
monitoring-limits
12. actual values
13. command/statusword
14. error-status
15.
communication
16. master/slave
17. motorpotentiometer
18.
positioning
19. winder
20. brake systems
21. keypad PG4001
22. fault log book
23. trace
24. signal generator
Groupen/parameters: