Parameter Setting
Level
Parameter
Set value
Description
4
OUTY
3
Valve control, no feedback
2
Valve control, feedback
4
INP2
2
Valve control, feedback
*RUCY
Motor valve operating time
5 4
(set the operating time according to the connected valve)
※Set runtime whether there is feedback or no feedback
Motor valve switching
no
1.5
4
CYT1 1.5
feedback
hysteresis adjustment
feedback
1.5 or more
4
SET0.4
0 or 1
0 : use output relay “b” contact when motor valve closed
1 : use output relay “a” contact when motor valve closed
* when OUTY=3, original RHTC become RUCY display
39 FY/FU operation manual
To Next Page
Loading...
