Taie FU400 - User Manual

Digital Temperature Controller
FY400/600/700/800/900
FU400/FU48/72/86/96
Ver 1.0
台 灣 儀 控 股 份 有 限 公 司
TAIWAN INSTRUMENT & CONTROL CO., LTD
Operation Manual

Summary

Notice and Safety Information

Safety Warnings and Cautions

Critical safety warnings regarding electrical shock and cautions for installation and operation.

Specifications and Packaging

Technical Specifications

Technical specifications including voltage, power, input, output, and environmental ratings.

Installation and Terminal Arrangements

FY400;FU400;FU48 Wiring

Detailed wiring diagram for FY400/FU400/FU48 models.

FY600 Wiring

Detailed wiring diagram for the FY600 model.

Terminal Arrangements and Basic Settings

FY700;FU72 Wiring

Detailed wiring diagram for FY700/FU72 models.

FY800;FU86 Wiring

Detailed wiring diagram for FY800/FU86 models.

FY900;FU96 Wiring

Detailed wiring diagram for FY900/FU96 models.

Input Type Setting

SV Value Setting

Auto Tuning Execution

Steps for initiating and performing the auto-tuning feature.

PID Value Setting

How to adjust and set the PID control parameters.

Parameter Levels

Level 1 Parameters

Detailed list and description of parameters in Level 1.

Parameter Levels (Cont.)

Level 2 Parameters

Detailed list and description of parameters in Level 2.

Parameter Levels (Cont. 2)

Level 3 Parameters

Detailed list and description of parameters in Level 3.

Parameter Levels (Cont. 3) and Access

Level 4 Parameters

Detailed list and description of parameters in Level 4.

Fast Parameter Access

Functional Descriptions

PV Bias

Retransmission

Functional Descriptions (Cont.)

Remote SV

Heater Break Alarm

Function to detect and alarm for heater disconnection or abnormal reduction.

Functional Descriptions (Cont. 2)

Dehumidification Function

Motor Valve Control

How the controller manages motor valve operations, with or without feedback.

Functional Descriptions (Cont. 3)

RAMP & SOAK

Functionality for setting temperature ramps and holding periods.

Alarm Action

Alarm Mode

Details the various modes available for configuring alarm actions.

Programmable Function

Parameter Setting

How to set parameters for program patterns, segments, and timings.

Programmable Function (Cont.)

Program Initial Setting

Programmable Function (Cont. 2)

Create Program

Guide on how to define program patterns and segments.

Program Execution Flow

Programmable Function (Cont. 3)

Program Setting Example

A practical example demonstrating how to set up a program.

Output Module Modification

Input Signal Modification

Thermocouple Input

Zero; Phase Control

Zero; Phase Control (Cont.)

Zero; Phase Control (Cont. 2)

Troubleshooting

Taie FU400 Specifications

General

Power Supply	100-240VAC, 50/60Hz
Dimensions	48 x 48 x 100 mm
Model	FU400
Input	Thermocouple, RTD
Output	Relay, SSR
Control Mode	PID
Display	Dual LED Display