Taie FA211 - User Manual

0

Summary

Notice before start-up

Safety Precautions and Warnings

Critical safety precautions and warnings for electrical shock and proper handling.

FA Series Controller Specifications

FY;FU Series Standard Specifications

Terminal Arrangement Guide

FY600 Terminal Layout

Terminal arrangement details for the FY600 controller.

FY700;FU72 Terminal Layout

Terminal arrangement details for the FY700/FU72 controllers.

FY800;FU86 Terminal Layout

Terminal arrangement details for the FY800/FU86 controllers.

FY900;FU96 Terminal Layout

Terminal arrangement details for the FY900/FU96 controllers.

FY100 Terminal Layout

FY101 Terminal Layout

Basic Controller Operations

Autotuning (AT) Function

Guidance on using the autotuning feature for PID value optimization.

Programmable RAMP;SOAK Operation

Parameter Settings - Level 1 (User)

Parameter Settings - Level 2 (PID)

Level 2 Parameter Descriptions

Detailed descriptions of parameters available in PID level.

Parameter Settings - Level 3 (Input)

Parameter Settings - Level 4 (SET)

Special Functions Configuration

Output Mode Selection and Cautions

Alarm Functions Configuration

Alarm Modes (ALD1;ALD2;ALD3)

Explanation of various alarm modes and their conditions.

Heater Break Alarm (HBA)

HBA Parameters and Conditions

Parameters, activated conditions, and remarks for HBA function.

Linear Input Type Configuration

FY100;101 Linear Input Hardware

Input Calibration Procedure

Step-by-step guide for calibrating the controller's input signals.

Taie FA211 Specifications

General

Dimensions	48 x 48 x 100 mm
Alarm Output	Relay
Power Supply	85~265VAC, 50/60Hz
Display	Dual 4-digit LED
Communication	RS-485 (Modbus RTU)
Operating Temperature	0~50°C
Protection Level	IP65 (Front Panel)