Taie FY600 - User Manual

Digital Temperature Controller
FY400/600/700/800/900
FA230/231
Operation Manual
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
8.8.8.8
Ver 1.3
TAIE
台 灣 儀 控 股 份 有 限 公 司
TAIWAN INSTRUMENT & CONTROL CO., LTD

Summary

1. Notice

Safety Warnings and Precautions

Covers critical warnings and cautions for safe operation and installation.

2. Order Information

FY Series Order Information

Details how to order FY series controllers, including model codes and options.

FA Series Order Information

Details how to order FA series controllers, including model codes and options.

3. Specifications

FY Series Specifications

Technical specifications for the FY series controllers.

FA Series Specifications

Technical specifications for the FA series controllers.

7. Installation

FY Controller Dimensions and Mounting

Provides dimensions and mounting details for FY400, FY600, FY700.

FY800;900 Dimensions and Mounting

Provides dimensions and mounting details for FY800 and FY900 controllers.

FA230;231 Dimensions and Mounting

Provides dimensions and mounting details for FA230 and FA231 controllers.

8. Terminal Arrangement

FY400 Terminal Connections

Details the terminal layout and wiring for the FY400 controller.

FY600 Terminal Connections

Details the terminal layout and wiring for the FY600 controller.

FY700 Terminal Connections

Details the terminal layout and wiring for the FY700 controller.

FY800 Terminal Connections

Details the terminal layout and wiring for the FY800 controller.

FY900 Terminal Connections

Details the terminal layout and wiring for the FY900 controller.

FA230 Terminal Connections

Details the terminal layout and wiring for the FA230 controller.

FA231 Terminal Connections

Details the terminal layout and wiring for the FA231 controller.

9. Basic Function Setting

Changing Input Signal Type

Procedure for modifying the controller's input signal type.

Setting the Set Value (SV)

How to adjust the target Set Value (SV) for the controller.

Automatic PID Tuning

Guide to automatically setting PID parameters via autotuning.

Manual PID Value Configuration

Steps for manually setting PID control parameters.

ON;OFF Control Action

How to configure the controller for ON/OFF control.

Alarm Mode Configuration

Alarm Value Configuration

11. Functional Descriptions

11.1 PV Bias Functionality

Corrects sensor deviations and controller differences using PV bias.

11.2 Retransmission Signal Output

11.3 Remote SV Input Function

11.4 Heater Break Alarm (HBA)

Monitors heater current, detects failures, and triggers alarms.

11.5 Dehumidification Function

11.6 Motor Valve Control Function

11.7 RAMP and SOAK Functionality

11.8 Proportional Control Explained

Basic control method proportional to error signal, with parameter settings.

11.9 Master-Slave Communication Setup

11.10 Piece Linear Compensation Method

12. Alarm Action

12.1 Alarm Mode Selection

Describes 19 alarm modes and their trigger logic for system protection.

13. Programmable Function

13.3 Program Initial Configuration

13.4 Creating a Control Program

13.6 Program Setting Example

14. Output Module Modification

14.1 Relay Control (1 a) Output Module

14.2 Relay Control (1 c) Output Module

14.3 SSR Control Output Module

14.4 Linear Control Output Module

14.5 Output Calibration Procedure Diagram

14.6 Output Calibration Steps

15. Input Signal Modification

15.1 Configuring Thermocouple Input

15.2 Configuring RTD Input

15.3 Configuring Linear (4-20 mA) Input

15.4 Linear Input Calibration Steps

16. Zero; Phase Control

16.1 1-Phase Zero Cross Control (SCR)

16.2 1-Phase Zero Cross Control (TRIAC)

16.3 3-Phase Zero Cross Control (SCR)

16.4 3-Phase Zero Cross Control (TRIAC)

16.5 1-Phase Angle Control (SCR)

16.6 1-Phase Angle Control (TRIAC)

17. Troubleshooting

Error Codes and Solutions

Lists common error codes, their descriptions, and corresponding solutions.

Taie FY600 Specifications

General

Brand	Taie
Model	FY600
Category	Controller
Language	English