Tait t2040 series ii User Manual

02/99 IPN: 409-20400-02 7
Keypad Indicators
Display Window Indicators
The LCD window provides you with direct visual access to information and messages about
the status of your calls and your radio.
Note:
Your T2040
II
has the ability to display messages in languages other than English.
This option is selected during programming.
Display Window Indicators
●
Indicates that your radio is queuing incoming calls.
●
Indicates that your radio is in alphanumeric entry or label selection mode. The
indicator flashes when there is an incoming status call with an associated alpha-
numeric label or when there is an incoming SDM.
●
Indicates that the displayed call is a status call or an SDM, or that your radio is at
present in status label selection mode or SDM entry mode.
●
Indicates that either the auxiliary device or mode that is controlled by the
Function
key is currently active.
●
Indicates that these keys may be used to display another entry in the queue, to
scroll through a list of preset number labels or status labels, to scroll through an
SDM or to edit an SDM.
●
TX
Transmit
Your radio is transmitting. This indicator should appear each time you press
the PTT key.
WAIT
Wait
The network is in the process of setting up a call and is not yet ready for you
to begin speaking.
GO
Go
Your radio has established a call between you and another party and you
are now able to speak to them.
Scrolling
available
Your radio in alphanumeric preset number mode or in status label selection
mode and you are now able to scroll through a list of choices using the
Up
and
Down
keys ( / ).

Tait t2040 series ii Specifications

General

Brand	Tait
Model	t2040 series ii
Category	Radio
Language	English