104 Appendices TB9100 Reciter Service Manual
© Tait Electronics Limited January 2006
8.2 Appendix B – ASIF Connectors
Note All signal directions are specified with respect to the ASIF.
8.2.1 J100 MPC859T BDM (Background Debug Mode) Connector
8.2.2 J101 ASIF to Reciter Connector
Table 8.2 MPC859T BDM Connector Pinout
Pin Number Signal Name Direction Function
1 VFLS0 O/P Flush buffer status
2 SRESET
I/O Soft reset
3GND
4 DSCK I/P Debug serial clock
5GND
6 VFLS1 O/P Flush buffer status
7 HRESET
I/O Hard reset
8 DSDI I/P Debug serial data in
9+3V3
10 DSDO O/P Debug serial data out
Table 8.3 ASIF to Reciter Connector Pinout
Pin Number Signal Name Direction Function
1 +28V I/P Main power input
2GND
3Not used
4GND
5Not used
6GND
7 SIF_3V3 I/P Power sense/power supply from reciter
8GND
9 PWR_ON I/P Reciter power status
10 PWR_RX I/P Receiver power status
11 PWR_EX I/P Exciter power status
12 GND
To Next Page
Loading...
Need help?
General
