100 Replacing Modules TB9100/P25 CG/P25 TAG Installation and Operation Manual
© Tait Limited March 2014
the channel LEDs will have the following states:
■ red indicates which is the currently selected reciter (channel)
■ green indicates that the reciter is receiving a valid signal
■ orange indicates that the currently selected reciter is receiving a valid
signal
The link settings described above are the factory default settings.
Example 2
With the following link settings:
■ subrack interconnect board links set for alarm status signal (see
“Configuring the Subrack Interconnect Board” on page 112)
■ control panel board link across pins 2 and 3
the channel LEDs will have the following states:
■ green indicates which is the currently selected
reciter (channel)
■ red indicates that the reciter is generating an alarm
■ green, flashing orange indicates that the currently selected reciter is
generating an alarm
To Next Page
Loading...
Need help?
General
