M2259-00-200-812 Transcrypt Programming 73
Copyright TEL Encrypted Radio Programming and Service Manual
3. Enter A nnnn, press [Enter]. The radio will briefly transmit.
4. Enter a programming commands to change a register in the module:
eg B 1234 LE to set the Late-entry time in module with ESN=1234 to the current
programmer value.
5. Check the radio returns AK nnnn xx.
Note: After a Move Download command (see TR30-3061 Manual), turn the radio off then on,
so that the module recognises the new scramble code.
To Next Page
Loading...
