126 Operating in trunked mode
Checking the queue
If you have missed an incoming call, or if you received
a status message or text message, it may be stored in
the queue. The queue icon appears and information
about the missed call or message may be shown on
the display.
The queue can be programmed to store multiple calls
or messages or just the last call or message.
In the example below, a status message was received
from Car 1. This is the first of three calls or messages
stored in the queue.
Press Options to either view, reply, call back, look at
the entry details, or delete the entry.
Your radio may be also programmed to automatically
view the full status message or text message on
receipt.
If there are calls or messages in the queue, the radio
may emit a warble tone for a period of time.
The notification starts again when the radio is
restarted or another call is received.
Accessing the queue
1 If the call or message information is not shown
already, press Menu > Call queue.
(Depending on how your radio is programmed, you
may be able to press a function key to access the
queue.)
identity of last
unanswered caller
scroll through
the calls
type of call
position in the queue
(not for single-item
queue)
options available
depend on type of
call
queued calls or messages
To Next Page
Loading...
