84 Operating in conventional mode
Otherwise you can only dial a number.
4 Press Call.
The call details appear on the display, the LED
glows red, and appears on the display.
Making a DTMF patch call
You may be able use DTMF patch dialing to connect
to a telephone network or signal another device by
dialing the number yourself or using preset dialing
sequences.
You may be able to either:
■ use a programmed function key
■ use the Main menu to dial the call
■ make a local call (see "Making a local call" on
page 82)
■ use your address book (see "Making a call using
the address book" on page 81)
■ dial DTMF tones (overdialing)
Using a function key
Depending on how DTMF patch calls are
programmed, some or the following steps may
not be necessary.
1 Select the required channel.
2 Press the function key programmed for DTMF
patch call.
Your radio may send tones to capture the line.
3 Press Send, or press the function key a second
time, to send the preset number.
You may hear telephone dialing and ringing tones.
12
CallClear
To Next Page
Loading...
Need help?
General
