132 Operating in trunked mode
Sending a preset text message
1 Press Menu and select Send > Text message >
Preset message.
In the Preset message menu, a short label
representing each message is displayed.
2 Scroll through the list of preset message labels
until the one you want appears.
3 Press Select, and the text message you have
chosen is now displayed.
4 Press Send to send the message, or Edit to
change the message.
Pressing will place the cursor at the start of
the message. Pressing will place the cursor
at the end of the message. When the message is
complete, press Options and select Send.
Creating a new text message
1 Press Menu and select Send > Text message >
New message.
2 Use the alphanumeric keys to add characters and
the Clear key to delete them. Use the scroll keys to
move through the characters.
SelectBack
Text message
Preset message
Edit message
SelectBack
Preset message
Contact
Site
Send
Contact base now
Back Edit
Options
On site|
Clear
abc
7/100
To Next Page
Loading...
Need help?
General
