Takagi T-KJr2-IN User Manual

Normal Operation
34│Page
 DO NOT set to 185 °F if you use your water heater in a recirculation
system. This will cause damage to the heater and void the warranty. (This
temperature setting is only available on the 510 (T-D2) models.)
 DO NOT adjust the left bank of dipswitches. For the 510 (T-D2) models.
 Turn off the power supply to the water heater before changing the
dipswitch settings.
 Only change the switches with the dark squares. The dark squares indicate
which direction the dipswitch should be set to.
510 (T
-
D2) models
110 (T
-
KJr2) and 310 (T
-
K4) models
510 (T
-
D2) models
110 (T
-
KJr2) and 310 (T
-
K4) models
Location of the bank of dipswitches on the c
omputer board
WARNING
Dipswitches
Right bank of
dipswi
tches
Left bank of
dipswitches
7
-
Seg. LED
-
Dipswitch settings for each temperature on the computer board
-
(45
OFF
ON
C)
113 F
1 2 3 4 5 6 7 8
OFF
ON
1 2 3 4 5 6 7 8
(50 C)
122 F
DEFAULT
(55
OFF
ON
C)
131 F
1 2 3 4 5 6 7 8
(60
OFF
ON
C)
140 F
1 2 3 4 5 6 7 8
Temperature Settings
Temperature Settings
<Right bank of dipswitches>
(45 C)
113 F
(40
OFF
ON
C)
104 F
(70 C)
158 F
(60 C)
140 F
(85 C)
185 F
(80 C)
176 F
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
OFF
ON
1 2 3 4 5 6
(45 C)
113 F
OFF
ON
1 2 3 4 5 6
(50 C)
122 F
DEFAULT
OFF
ON
1 2 3 4 5 6
(55 C)
131 F
OFF
ON
1 2 3 4 5 6

Takagi T-KJr2-IN Specifications

General

Brand	Takagi
Model	T-KJr2-IN
Category	Water Heater
Language	English