(TK-RE02)
The Temperature Remote
Controller has two functions. It
allows the output temperature
from the water heater to be
adjusted within the range of
99 °F to 167 °F, and it also
works as a diagnostic tool that
will give a concise error code whenever there is a
problem with the unit. The temperature options
are 99°F, 100°F, 102°F, 104°F, 106°F, 108°F, 109°F,
111°F, 113°F, 115°F, 117°F, 122°F, 131°F, 140°F,
158°F, and 167°F. See the trouble shooting section
(TM-RE30)
The Temperature Remote
Controller has two functions. It
allows the output temperature
from the water heater to be
adjusted within the range of
99 °F to 185 °F, and it also
works as a diagnostic tool that
will give a concise error code whenever there is a
problem with the unit. The temperature options
are 99°F, 100°F, 102°F, 104°F, 106°F, 108°F, 110°F,
111°F, 113°F, 115°F, 117°F, 122°F, 131°F, 140°F,
149°F, 158°F, 167°F, 176°F and 185°F. See the
trouble shooting section for information on
possible error codes.
3. Backflow Preventer: 9007678005 (TK-BF01)
The Backflow preventer prevents
the backflow of air through the
exhaust vent. This helps prevent
harmful exhaust gases from
entering the home, as well as
helping to prevent the unit from
freezing in areas where cold air can be blown or
drawn into the exhaust system. Install this vent
damper in accordance with the installation
instructions and any applicable codes.