Takeuchi TB135 User Manual

255
OPTIONS
Immobilizer System
5. Return to the OFF (O) position from the
ON ( I ) position and remove the
registration key.
6. Within 10 seconds, insert the immobilizer
key into the starter switch and turn it from
the OFF (O) position to the ON ( I )
position.
7. Hold for about 10 seconds.
8. Return to the OFF (O) position from the
ON ( I ) position and remove the
immobilizer key.
9. Perform steps (6) to (8) for all immobilizer
keys (maximum of 5 keys) that you wish
to register.
10. Within 10 seconds after registering the
immobilizer keys, insert the registration
key into the starter switch and turn it from
the OFF (O) position to the ON ( I )
position.
11. Hold for about 10 seconds.
12. Return to the OFF (O) position from the
ON ( I ) position and remove the
registration key.
This completes the registration procedure.
13. Check that the engine starts using all the
registered keys (registration key and
immobilizer keys).
If the engine does not start, re-register
the keys.
If the engine still does not start, consult a
Takeuchi sales or service outlet.
N0B030E
Registration key
N0B027E
Immobilizer key
N0B028E
Immobilizer key
N0B029E
Registration key
N0B030E
Registration key

Takeuchi TB135 Specifications

General

Brand	Takeuchi
Model	TB135
Category	Compact Excavator
Language	English