89
TRANSPORT
Securing the Machine
After loading the machine in the designated
position, secure it as described below.
Transporting Posture
1. Lower the dozer blade.
2. Fully extend the bucket and arm cylinders,
then lower the boom.
3. Stop the engine and remove the starter
key.
4. Set the safety lock lever securely to the
locked position.
5. Set stoppers in front and behind the
crawlers.
6. Put a chain or wire rope over the lower
frame and fasten it securely to prevent
sideways slippage.
7. Secure the bucket with a chain or wire
rope.
IMPORTANT: Place a wooden block
under the bucket so that it is not damaged
by hitting the floor.
E4F002
Wire rope
Padding
To Next Page
Loading...
Need help?
General
