47
CONTROLS
Switches
Starter Switch
IMPORTANT: Do not repeatedly switch
the key from OFF to ON and ON to OFF
over a short period. Doing so will cause
engine breakdown.
PREHEAT..... Position for preheating the
engine.
OFF .............. Position for stopping the
engine and inserting or
removing the key.
ON ................ Position in which the engine
is running. At this position, all
the electrical equipment is
functional.
START .......... Position for starting the
engine. When the key is
released, the switch
automatically returns to the
ON position.
Horn Switch
Press the switch on the right operating lever
to blow the horn.
Decel. Switch
WARNING
Set the operating and travel levers to
neutral before operating the decel. switch.
The machine’s operating speed will
change abruptly if the switch is operated
while the levers are engaged.
Press the switch on the right operating lever
to lower the engine speed to low idling.
Press the switch again to return to the engine
speed set with the throttle lever.
Supplement: The one-touch decelerator is
a device for lowering the engine speed and
reducing fuel consumption when little engine
output is required, for example when the
operating and travel levers are in neutral.
PREHEAT
START
ON
OFF
E4B010
G4B015
G4B025
To Next Page
Loading...
Need help?
General
