Air Conditioner
After starting the engine, turn the air
conditioner ON and adjust the switches as
shown in the diagram above.
Set the temperature control dial and fan
switch to the desired positions.
Quick cooling
To cool the cab quickly, set the airflow mode
control dial to the recirculation position and
the fan switch to High, as shown on the
diagram above.
Defogging the Windows
CAUTION
If the air conditioner is set to high when
using the defroster, the difference between
the external and internal temperatures
increases, and fog may form on the
outside of the windows. If this happens,
either turn the air conditioner OFF or turn
the temperature control dial clockwise
(WARM).
After starting the engine, turn the air
conditioner ON and adjust the switches as
shown in the diagram above.
The outflow slot of foot area and the outflow
slots of the defroster can be directed at the
front window.