Machine Operation
Stopping Travel
WARNING
� Park the machine on firm, level ground
and apply the parking device. If you
must park on a slope or incline, block
the machine securely to prevent
movement.
�
If any controls should be touched
accidentally when the safety lock lever
has not be locked, the machine will
move suddenly, and cause serious injury
or death.
�
Note that the dozer blade control is not
locked, even when the safety lock lever
is set to the lock position. Do not touch
this control accidentally.
CAUTION
Never bring the machine to a sudden stop
except in the case of a true emergency.
Stop as gently as possible.
1. Slowly step on the brake pedal to stop the
machine.
WARNING
When traveling, do not step on the travel
pedal for the opposite direction. Doing so
is dangerous as it causes the machine to
stop suddenly.
When the steering axle is in front of the
operator’s seat:
To move forward:
Step on the pedal (F).
To move backward:
Step on the pedal (R).
When the steering axle is behind the operator’s
seat:
To move forward:
Step on the pedal (R).
To move backward:
Step on the pedal (F).
To Next Page
Loading...
Need help?
General
