Takeuchi TB225 User Manual

8-19
OPTIONS
TAKEUCHI SECURITY SYSTEM
7. Turn the starter key (2) from the ON (ACC)
to the OFF position, and then remove it
from the starter switch.
To continue registration, repeat the steps
from Step 5.
To end registration, proceed to Step 8.
8. Insert the master key (1) into the starter
switch and turn the key from the OFF to
the ON (ACC) position. Or, wait for five
minutes or more.
9. If any starter key has been registered, the
message “All the registration is completed”
appears. Turn the master key (1) from the
ON (ACC) to the OFF position, and then
remove it from the starter switch to
complete the registration.
If no starter key has been registered, the
message “Registration failure” appears,
and the registration information is returned
to the initial state.

Takeuchi TB225 Specifications

General

Engine Make	Yanmar
Max Dig Depth	2, 580 mm
Bucket Capacity	0.03 - 0.11 m3
Max Reach	7, 010 mm
Max Digging Depth	3, 870 mm