38
CONTROLS
Doors and Covers
Starter Key
The starter key is used not only to start and
stop the engine, but also to lock and unlock
the following places:
¡Fuel filler cap ¡Engine hood
¡Cab door ¡Manual storage
Cab Door
When mounting and dismounting the
cab, first open the door fully to the locked
position and check that it does not move.
Open the door fully and press it against the
catch at the back of the door to lock it in place.
Always lock the door when mounting and
dismounting and when operating the
machine.
Lock and unlock
: Release : Lock on
1.Insert and turn the starter key.
Opening
1.Pull the knob (1) towards you and open
the door.
To open the door from inside the cab, push
the lever (2) to the front.
2. Open the door fully and press it against
the cab to lock it in place.
Closing
1.Pull the lever (3) towards outside and
release the door.
2.Close the released door.
Front Window (Cab)
¡Grasp the handles firmly with both
hands when opening and closing the
front window. Your head or hands may
get caught if they slip.
¡If you open the front window, be sure
to lock it in place with the lock pin on
the right side. The window may fall if it
is not locked in place.
E4B003
WARNING
WARNING
F4B002
3
1
F4B001
2
To Next Page
Loading...
