72
OPERATION
Machine Operation
Stopping Travel
¡Park the machine on firm, level ground
and apply the parking device. If you
must park on a slope or incline, block
the machine securely to prevent
movement.
¡Before leaving the operator's seat, set
the safety lock lever securely to the
lock position and stop the engine. If any
controls should be touched
accidentally when the safety lock lever
has not be locked, the machine will
move suddenly, and cause severe
injury or death.
¡Note that the dozer blade control is not
locked, even when the safety lock lever
is set to the lock position. Do not touch
this control accidentally.
Never bring the machine to a sudden stop
except in the case of a true emergency.
Stop as gently as possible.
1.Slowly set the left and right travel levers to
the neutral position. The machine stops.
Spin Turn
aTo spin left:
Tilt the left lever backward and the right
lever forward.
eTo spin right:
Tilt the right lever backward and the left
lever forward.
CAUTION
WARNING
NeutralNeutral
To Next Page
Loading...
Need help?
General
