EasyManua.ls Logo

Takeuchi TB53FR - Recommended Lubricants

Takeuchi TB53FR
447 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
II-13
TB53FR
RECOMMENDED LUBRICANTS
RECOMMENDED LUBRICANTS
Use different fuels, lubricants and greases according to the temperature, referring to the chart below.
Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance has deteriorated severely.
Whenever possible, use the same brand of lubricant as before. If changing with a different brand, replace the entire quantity
– do not mix different brands.
Part
Engine oil pan
Diesel engine oil
API service
CD
After first 50 hrs.
Every 250 hrs.
Upper limit: 8.6 L
Lower limit: 4.2 L
Use a clean, Quality fuel for performance and optimum engine life.
To prevent fuel flow problems in cold weather, use diesel fuel with
a pour point of at least -12°C (10°F) below the lowest expected
ambient temperature.
Minimum cetane number is 45. Low temperature or high altitude
operation may require the use of fuel with a higher cetane number.
Type
Type by temperature
Replacement
interval
-22 -4 14 32 50 68 86
104°F
-30 -20 -10 0 10 20 30
40°C
SAE 5W-20
SAE 10W-30
SAE 15W-40
ISO VG68
ISO VG46
ISO VG32
Hydraulic tank
Fuel tank
Engine cooling
system
30% coolant mixture
50% coolant mixture
* If the percentage of the traveling time within the total operating time is high, replace the gear oil earlier than the specified time.
** For water, use tap water (soft). Do not use well or river water.
*** When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the coolant manufacture’s instructions to
determine the mixture ratio.
Every 2000 hrs.
Every 1000 hours
After first 250 hrs.*
Every 1000 hrs.
Every 50 hrs.
Total system: 120 L
Tank level: 79 L
75 L
7.2 L
0.8 L
Antiwear
hydraulic oil
(Option: Biode-
gradable oil)
Diesel fuel
Coolant
(water**+Coolant***)
Gear oil
API-GL-4
Gear oil
API-GL-4
SAE 90



Travel reduction
gear
Carrier Roller
Track Roller
Idler
Slew bearing
60 mL
Mobil gear
SHG 680
Daily or every 10
hrs.

Capacity
90 mL
70 mL
Slew Grease Bath
Working
equipment
When required
Lithium based
grease EP-2
NLGI No. 2
SAE 90
SAE 90
Gear oil
API-GL-4

Levers
2.8 L
As required

Table of Contents

Other manuals for Takeuchi TB53FR

Related product manuals