MACHINE CONFIGURATION
DRIVE SYSTEM
III-4TB53FR
15. Disconnect the accelerator wire (12) from the
engine.
16. Disconnect the battery cable and all the connec-
tions on the engine side of the electric wirings
(14).
• Attach identification labels to individual wir-
ings for correct reassembling.
• Disconnect the wirings from the clamps and
the bands.
17. Disconnect the engine ground cable (15).
18. Disconnect the exhaust pipe (16).
19. Remove the cushion rubber tightening double
nuts (17) and the engine assembly.
Installing the Engine
Follow the same procedure as for removal in the
reverse order.
To Next Page
