103
MAINTENANCE
Walk-Around Inspection
Inspecting by Opening the
Engine Hood and Covers
1. Check for any twigs, leaves, oil or other
combustible materials around the engine
and battery.
2. Check for oil or engine coolant water
leakage around the engine.
3. Check for oil leakage from the hydraulic
tank, hydraulic devices, hoses and
connections.
Perform the following inspections once every day before starting the engine the first time.
WARNING
¡¡
¡¡
¡Before operating, perform the walk-around inspections and make repairs
immediately should any irregularities be found.
¡¡
¡¡
¡Be sure to secure the engine hood or cover when opening it. Do not open the engine
hood or cover on slopes or in strong wind.
Before starting the engine, look around the machine and lower body, clean any combustible
materials off high temperature parts of the engine, and inspect for such irregularities as oil
leakage, water leakage and looseness of nuts and bolts.
2
15
10
13 14
1
3
8 4
6 7
9
5
12
11
L2G003
To Next Page
Loading...
Need help?
General
