SAFETY
Operating Precautions
Watch out for hazardous working
conditions
T7A021
• Never undercut a high bank. Be particularly
alert for the possibility
of
a cave-in.
•
Do
not operate
in
places where there
is
a
danger of falling rocks.
•
Do
not approach unstable surfaces (cliffs,
road shoulders, deep trenches, etc.). The
ground may give way under the machine's
weight or vibrations, causing the machine
to tip over.
• The ground
is
weak after
rain
or
explosions.
• The ground
is
also unstable on banks
and near dugout trenches.
Travel
in
narrow or congested
places
T7A022
To
avoid contact accidents, pay attention to
the surroundings at narrow sites, indoors,
and congested places and operate at
speeds at which the machine can be safely
operated.
24
Precautions when passing
through tunnels
or
near high
walls
T7A023
Careless entry into tunnels or places with
high walls can lead to serious accidents,
such as contact accidents, etc. Check
height and width limits
in
advance and verify
that the machine
is
within the limits.
Do not drive on soft ground
Drving onto soft ground can result
in
the
machine tilting on its own weight, tipping
over, or falling
in.
Do
not enter weak ground such as that
following back-filling.
To Next Page
Loading...
