SAFETY
Maintenance
Precautions
Attach a "DO
NOT
OPERATE" tag
Severe injury could result if
an
unauthorized
person starts the engine or touches controls
during inspection or maintenance.
• Stop the engine and remove the key
before performing maintenance.
• Attach a "
DO
NOT
OPERATE"
tag to the
ignition switch or control lever.
Use the correct tools
E3A530
Do
not use damaged or weakened tools, or
tools designed for other purposes. Use tools
suited for the operation.
Replace important safety parts
periodically
• Replace fuel hoses periodically.
Fuel
hoses become weaker over time, even if
they appear to be
in
good condition.
• Replace important safety parts whenever
an
malfunction
is
found, even if it
is
before
the normal time for replacement.
Refer to the section titled "Important
Parts" for further details.
28
Anti-explosive lighting
Use anti-explosive electrical fixtures and
lights when inspecting fuel, oil, coolant,
battery fluid, etc. If lighting that
is
not anti-
explosive breaks, the substance could ignite,
resulting
in
serious injury or death.
Do not allow unauthorized
personnel
in
the work area
E3A140
Do
not allow unauthorized personnel
in
the
work
area.
Chips or other debris can fly off
machine parts when grinding, welding or
using a hammer.
To Next Page
Loading...
