SAFETY
Maintenance
Precautions
Securely block
the
machine
or
any
component that may fall
E
3A570
• Before performing maintenance or repairs
under the machine, set the bucket against
the ground or
in
the lowermost position.
• Securely block the tracks.
• If you must work beneath the raised
machine or equipment, always use lift
arm stop, jack-stands or other rigid and
stable supports. Never get under the
machine or working equipment if they
are
not sufficiently supported. This procedure
is
especially important when working on
hydraulic cylinders.
Securely block the raised lift arms
• If you must work beneath the raised lift
arms, securely engage the lift arm stop.
Never get under the lift arms and bucket if
they
are
not sufficiently supported.
• Disconnecting or loosening any hydraulic
line,
hose, fitting or component or a parts
failure can cause the lift arms to drop.
30
• Service the lift arm stop if damaged or if
parts
are
missing. Using a damaged lift
arm stop or with missing parts can cause
the lift arms to drop, causing injury or
death.
Secure
the
rear door when
opened
Be
sure to secure the rear door when opening
it.
Do
not open the
rear
door on slopes or
in
strong wind.
Cautions on tilting up the canopy
• Raising or lowering the canopy while the
engine
is
running may cause the machine
to move, and cause serious injury or
death. Lower the working equipment to
the ground and stop the engine before
raising or lowering the canopy.
• When the canopy
is
tilted up, support
it
firmly with the stop to prevent it from
falling.
Place heavy objects
in
a stable
position
E3A560
When removing or installing the bucket or
attachment, place
it
in
a stable position so
that
it
does not tip over.
To Next Page
Loading...
