Takeuchi TL250 User Manual

OPERATION
Starting and Stopping the Engine
Warming Up the Engine
IMPORTANT: Avoid racing the engine
until
it is warmed up.
Do
not warm up the engine for long
periods
of time (20 minutes or more).
1. Return the throttle lever to idle position,
and idle the engine for about 5 minutes
with
no load.
77
Stopping the Engine
IMPORTANT: Do not stop the engine
suddenly when operating with heavy
loads
or at maximum speed. Doing so
may cause the engine
to overheat or seize.
Never bring the engine
to a sudden stop
except in the case
of a true emergency.
1. Idle the engine for about 5 minutes to
gradually let it cool.
o~
PREHEAT ON
'
'
START
/
J20005E
2. Turn the key to the OFF position to stop
the engine.

Takeuchi TL250 Specifications

General

Engine Make	Yanmar
Engine Power	74 hp
Lift Height	3, 275 mm
Net Power	73.5 kW
Travel Speed - High	11.8 km/h
Hydraulic Pump Flow	92.5 L/min
Auxiliary Hydraulic Flow	92.5 L/min
Width	1, 980 mm
Engine Model	4TNV98
Travel Speed - Low	7.2 km/h