Takeuchi TL250 User Manual

OPERATION
Operating Procedures
• Do not attempt a spin turn or pivot turn at
high speeds.
Doing so may cause extreme wear and/or
the tracks to come off.
• Do not cut across a slope.
Doing so may cause extreme wear and/or
the tracks to come off.
• Do not exceed the loader's rated operating
capacity.
• Do not use buckets or attachments that
exceed the loader's operating capacity.
87
• Do not use the downward force of the
bucket to drive piles.
• Do not dig down deeply with the bucket.
Doing so could damage the bucket and
lift arms.
• Hitting the bucket against rocks, etc.,
could damage the bucket or the bucket
cylinders.

Takeuchi TL250 Specifications

General

Engine Make	Yanmar
Engine Power	74 hp
Lift Height	3, 275 mm
Net Power	73.5 kW
Travel Speed - High	11.8 km/h
Hydraulic Pump Flow	92.5 L/min
Auxiliary Hydraulic Flow	92.5 L/min
Width	1, 980 mm
Engine Model	4TNV98
Travel Speed - Low	7.2 km/h