Takeuchi TL8 User Manual

2-51
CONTROLS
c. Stop the engine and wait for at least 5
minutes until bubbles escape from the
hydraulic oil in the tank.
IMPORTANT: Follow the procedures for
purging air as instructed by the
attachment manufacturer, if applicable.
6. Check for oil leaks.
ACCESSORIES
Operating the auxiliary hydraulic circuits
1. Operate the auxiliary hydraulic buttons as
follows.
Auxiliary hydraulic buttons
To discharge from the hydraulic oil port (e)
.................................................... Press (E)
To discharge from the hydraulic oil port (f)
....................................................Press (F)

Takeuchi TL8 Specifications

General

Tipping Load	6, 021 lbs
Engine Make	Kubota
Engine Model	V3307-CR-TE4
Rated Operating Capacity	2, 107 lbs
Auxiliary Hydraulics - High Flow	Not available
Gross Power	Not available