Takeuchi TL8 User Manual

3-22
OPERATION
OPERATIONS POSSIBLE WITH THIS MACHINE
IMPORTANT: Do not fully extend the bucket cylinders, push the bucket into the ground
and move the machine to use the traveling force for digging. Doing so could damage
the bucket cylinders.
Scooping
OPERATING PROCEDURES
Lower the bucket to the ground and set it parallel to the ground or tilt it slightly downward.
Move the machine forward, push the bucket well into the material and scoop it by rolling back
the bucket.
Digging
Tilt the bucket forward at an angle appropriate for the ground hardness. Slowly travel forward,
dig into the ground with the cutting edge of the bucket. When the bucket is full, tilt it
backward.

Takeuchi TL8 Specifications

General

Tipping Load	6, 021 lbs
Engine Make	Kubota
Engine Model	V3307-CR-TE4
Rated Operating Capacity	2, 107 lbs
Auxiliary Hydraulics - High Flow	Not available
Gross Power	Not available