Takeuchi TL8 User Manual

5-22
MAINTENANCE
LUBRICATING THE WORKING EQUIPMENT
1. Keep the machine configuration as shown in the diagram above, lower the working
equipment to the ground, and then stop the engine.
2. Use the grease gun to lubricate the grease fittings.
3. Wipe off the excess grease.
DAILY INSPECTION (EVERY 10 HOURS)

Takeuchi TL8 Specifications

General

Tipping Load	6, 021 lbs
Engine Make	Kubota
Engine Model	V3307-CR-TE4
Rated Operating Capacity	2, 107 lbs
Auxiliary Hydraulics - High Flow	Not available
Gross Power	Not available