Tally Dascom 1145 - Page 39

Tally Dascom 1145/1125+
24
System setup
Valid Settings
Function
LQ Text Quality
LQ, NLQ
The “LQ Text Quality” parameter is invalid when
Font is set to Draft.
When Font is set to another font other Draft, the
“LQ Text Quality” parameter will determine
whether to print in NLQ mode or LQ mode.
Change Pin#1:
No, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20,
21, 22, 23, 24
Defines the first broken / worn out pin. This pin
will be substituted by an adjacent pin in the
second pass printing.
No: Not to substitution of the worn out pin.
Change Pin #2
No, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20,
21, 22, 23, 24
Defines the first broken / worn out pin. This pin
will be substituted by an adjacent pin in the
second pass printing.
No: Not to substitution of the worn out pin.
Power-Saving
OFF, 1min, 2min,
5min, 10min
Defines the idle period before the printer gets
into Save-energy Mode.
OFF: The printer never goes into Save-energy
Mode.
MultiPaper
Disable, Standard,
Enhance
Disable: The printer ignores the determination of
paper thickness sensor; it keeps the impact
force and the print speed unchanged.
Standard: The printer increases the impact force
and reduces the print speed.
Enhance: The printer prints with even stronger
impact force and slower print speed.
Impact
Normal, Heavy
Normal: The print speed is faster causing head
hot easily and the impact force is weaker.
Heavy: The print speed is reduced, resulting
better thermal performance and copy capability.
Graphic Speed
Normal, Fast, Ultra
Selects different print quality and print speed for
graphic.