Tally Dascom DP-230L - User Manual

Questions and Answers

M
michaelstephensAug 17, 2025
What to do if my Tally Dascom Printer accepted the print data, but did not print it?
- J
  James WelchAug 17, 2025
  If your Tally Dascom Printer isn't printing data despite accepting it, there could be a few reasons: * The voltage might be low, so check and charge the printer. * The media might not be loaded correctly; ensure it is properly loaded. * The emulation language or data code system could be incorrect. Set up the correct emulation language and data code system.
A
Andrew MullinsAug 19, 2025
Why my Tally Dascom Printer does not work when I press the power button?
- D
  Donald WilsonAug 19, 2025
  If your Tally Dascom Printer doesn't work when you press the power button, it might be due to these reasons: * The battery may not be installed correctly. Make sure to install the battery correctly. * The battery may have run out of power. Please charge it immediately.
S
Stephanie OrtizAug 22, 2025
Why is my Tally Dascom DP-230L only feeding paper, but not printing?
- N
  Nicole KentAug 22, 2025
  If your Tally Dascom Printer is feeding paper but not printing, it is likely that the media is loaded in reverse. To resolve this, load the paper correctly according to the user guide.
R
Rachael ZamoraAug 25, 2025
Why does my Tally Dascom DP-230L Printer automatically shut down?
- R
  Rachel MooreAug 26, 2025
  If your Tally Dascom Printer is shutting down automatically, it could be due to the following reasons: * The battery may have run out of power. Charge or replace the battery immediately. * Electrostatic discharge may have occurred. Restart the printer.
J
Joshua AndersonAug 28, 2025
What to do if the power light is off when the power adapter is connected to Tally Dascom DP-230L?
- R
  roachrickAug 28, 2025
  If the power light is off when the power adapter is connected to your Tally Dascom Printer, it could be due to these reasons: * The power adapter may not be properly connected. Ensure it is securely connected. * The power adapter may be damaged. Use a voltmeter to check if the adapter voltage is 12VDC. * The battery may not be installed correctly. Install the battery correctly.
A
Allison SingletonAug 30, 2025
How to fix if Tally Dascom DP-230L Printer can't feed the paper steadily to the label?
- M
  Micheal LewisAug 30, 2025
  If your Tally Dascom Printer is not feeding paper steadily to the label, it could be due to these reasons: * The Label / Media Sensor is contaminated. Clean the sensor. * The printer does not power on to set up the label Paper fully. Restart the printer. * The label threshold is incorrect. Adjust the label threshold.
S
smithmckenzieSep 2, 2025
Why does my Tally Dascom DP-230L have poor print quality or ink fades?
- J
  jamie66Sep 2, 2025
  If you're experiencing poor print quality or ink fading with your Tally Dascom Printer, it could be due to these reasons: * The printer hasn't been cleaned for a long time, causing the mechanism to be contaminated with dirt. Clean the mechanism. * The printing paper may be of poor quality. Purchase approved Media.
C
Charles ChenSep 4, 2025
What to do if my Tally Dascom DP-230L has no paper feeding?
- S
  Sierra ScottSep 5, 2025
  If your Tally Dascom Printer is not feeding paper, it could be due to these reasons: * There is a jam in the paper path, or the media is loaded in reverse. Check the paper path and install the media again. * The printing paper may be of poor quality. Purchase approved Media. * The lid of the paper bin is not closed. Cover the paper bin cover.
K
Karen ValdezSep 7, 2025
Why is the printout from my Tally Dascom Printer garbled?
- T
  Tyler CardenasSep 7, 2025
  If the printout from your Tally Dascom Printer is garbled, it's likely that the emulation language or data code system is not correct. To fix this, set up the correct emulation language and data code system.
S
Samantha YoungSep 10, 2025
How to solve that Tally Dascom Printer cannot be printed through an optional interface?
- M
  Maurice CaseySep 10, 2025
  If your Tally Dascom Printer cannot be printed through an optional interface, it is likely that the interface setting is not correct. To resolve this, print the self-test page and correct the interface setting.

Summary

FCC Part 15 Class B Compliance

RF Warning Statement

Statement regarding RF exposure evaluation and portable use conditions.

Canadian Radio Interference Statement

Battery Disposal

Instructions for disposing of used batteries according to regulations.

Acknowledgments and Copyright

General Safety Warnings

Packaging List

Standard Accessories

List and images of standard accessories provided with the printer.

Printer Parts List

Preparation Before Using

Battery Installation and Disassembly

Procedure for installing and removing the printer's battery.

Media Handling

Charging the Battery

Quick Start Instructions

Power On and Off

Procedure for turning the printer on and off using the power button.

Paper Feeding

How to perform line feeds, form feeds, and print self-test pages.

Control Panel

Description of the printer's control panel buttons and functions.

Printer Status Definition

Hexadecimal Mode

Self-Test Procedure

Self-Test Page

Confirmation of successful self-test page printing.

Production and Configuration Information

Configuration

Install Config Tool

Step-by-step instructions for installing the configuration utility.

Configuration Setup

Steps to connect the printer and adjust interface parameters.

Reset Factory Settings

Procedure to revert printer settings to their default factory values.

Software Upgrade

Instructions for updating the printer's firmware using the configuration tool.

Communication

USB Communication

Procedure for connecting the printer to a computer via USB.

Bluetooth Communication

Details on the printer's Bluetooth interface and device name.

Maintenance

Daily Printer Maintenance

How to clean the printer's exterior and internal mechanisms.

Printing Paper Use and Storage

Recommendations for storing print paper and printed documents.

Troubleshooting

Appendix

Printer Parameters

Detailed technical specifications including printing, media, memory, and ports.

DASCOM Representative Information

Contact details for DASCOM representatives in various regions.

Tally Dascom DP-230L Specifications

General

Type	Dot Matrix Printer
Print Technology	Impact dot matrix
Printing Method	Serial Impact Dot Matrix
Print Width	80 columns
Number of Pins	24
Print Resolution	360 x 360 dpi
Interface	Parallel, Serial, USB
Paper Handling	Friction feed
Paper Path	Rear
Paper Size	Cut sheet, Continuous forms
Noise Level	55 dB