Tally Dascom 1125+ - User Manual

Questions and Answers

C
chelsealaraAug 20, 2025
What to do if Tally Dascom 1125+ is on but it will not print?
- R
  Ryan HahnAug 20, 2025
  If your Tally Dascom printer is on but not printing, ensure the Online indicator is lit. Check the interface cable connecting the printer and computer. Verify paper is loaded. Run the printer Status Page to identify if the problem is with the interface, computer, printer settings, or software. Also, ensure the printer driver selected in your software matches the emulation selected on the printer.
A
Amanda MontesAug 22, 2025
How to fix if Tally Dascom Printer printing is too light or too dark?
- D
  Dylan BurnsAug 22, 2025
  If your Tally Dascom printer's printing is too light or too dark, ensure the ribbon cartridge is properly installed and feeds smoothly. Replace the ribbon if needed. Also, make sure the print gap lever is set for the thickness of your paper.
J
James WestAug 25, 2025
What to do if Tally Dascom 1125+ smears and stains appear on the page?
- D
  Darren WilliamsAug 25, 2025
  If your Tally Dascom printer is showing smears and stains on the page, ensure the print gap lever is set correctly for your paper thickness. Check the ribbon for wear and replace if necessary. Inspect the print head for dirt and clean with a soft cloth if needed. The print head may need replacement.
D
daniel97Aug 27, 2025
Why does Tally Dascom 1125+ Printer paper jam while loading?
- J
  Jesse WrightAug 27, 2025
  If your Tally Dascom printer is experiencing paper jams while loading, turn off the printer and remove the jammed paper, clearing any obstructions. Ensure the Print Gap lever is correctly set for your paper thickness. Verify the paper isn't folded, creased, or torn. For continuous forms, ensure the left and right tractors are set so the forms are stretched taut.
J
Jennifer SolisAug 28, 2025
Why Tally Dascom Printer power does not turn on?
- M
  mendezbrianAug 28, 2025
  If your Tally Dascom printer's power does not turn on, check if the mains voltage is correct and ensure the power cord is securely connected to both the printer and the outlet. Verify the power outlet is functional. Turn the power off, wait a minute, then turn it back on. If it still doesn't work, contact your dealer.
M
Michele JohnsonAug 29, 2025
What to do if Tally Dascom 1125+ printing is erratic or the wrong characters are printed?
- A
  alvarezamyAug 30, 2025
  If your Tally Dascom printer is printing erratically or printing the wrong characters, make sure the interface cable is securely connected to both the printer and computer. Ensure the printer driver selected in your software matches the emulation selected on the printer. Check the interface cable length (Maximum Parallel & USB: 2 meters, Serial: 15 meters). Try using a different interface cable.
F
Frances HowardAug 31, 2025
What to do if Tally Dascom 1125+ paper jams while printing?
- T
  teresapattersonAug 31, 2025
  If your Tally Dascom printer experiences paper jams while printing, turn it off and remove the jammed paper, clearing any obstructions. Ensure the Print Gap lever is set for the correct paper thickness. For continuous forms, ensure the incoming and outgoing paper stacks are correctly placed so paper feeds straight.
J
Jesus OrtizSep 2, 2025
Why is the page blank when printing from my Tally Dascom Printer?
- J
  John CarterSep 3, 2025
  If the page is blank when printing with your Tally Dascom printer, ensure the ribbon cartridge is properly installed and the gap lever is set correctly.
C
Christina BradleySep 4, 2025
How to fix vertically misaligned (jagged) printing on Tally Dascom Printer?
- A
  Audrey SmithSep 4, 2025
  To correct vertical misalignment (jagged printing) on your Tally Dascom printer, use the printer's vertical alignment function to check the vertical print alignment and adjust it if necessary.
C
Cory DavidsonSep 6, 2025
Why Tally Dascom Printer paper cannot be loaded or fed?
- S
  Sarah MaloneSep 6, 2025
  If paper cannot be loaded or fed into your Tally Dascom printer, ensure the paper select lever on the top right is set correctly. Move the lever to the front for single sheets or to the rear for continuous forms. Also, ensure that the paper covers the paper-out sensor.