Tally Dascom 1125+ - Paper Setup

Tally Dascom 1145/1125+
25
5.2 Paper Setup
Paper Setup
Valid Settings
Function
Single
FormLen
2.5, 11/4, 3, 3.5,11/3, 4,
5, 5.5, 6, 7, 8, 9, 10, 11,
12, 14, A4, B4,
Customize
Sets the page length for single paper
Single Top
0, 1/6, 1/4, 1/3, 1/2, 2/3,
3/4, 1, Define
Defines the separation in inches from the top
edge of a single paper to the first print line.
Single Bottom
0, 1/6, 1/4, 1/3, 1/2, 2/3,
3/4, 1, Define
Defines the separation in inches from the bottom
edge of a single paper to the last print line.
Single Left
Mrg (1.00mm)
-7, -6, -5, -4, -3, -2,
-1, 0, 1, 2, 3, 4, 5, 6, 7,
Define
Compensation value added to Single Left Mrg.
Single Top
Mrg (0.01”)
-7, -6, -5, -4, -3, -2,
-1, 0, 1, 2, 3, 4, 5, 6, 7
Compensation value added to Single Top.
Single Auto
Load
Disable, 0.5sec, 1sec,
1.5sec, 2sec
Defines the settling time before a single sheet is
loaded.
Disable: Press the【Load/Eject】key manually
to load a single sheet.
Fanfold
FormLen
2.5, 11/4, 3, 3.5, 11/3, 4,
5, 5.5, 6, 7, 8, 9, 10, 11,
12, 14, A4, B4, Define
Sets the Page Length for fanfold.
Fanfold Top
0, 1/6, 1/4, 1/3, 1/2, 2/3,
3/4, 1, Define
Defines the separation in inches from the top
edge of a fanfold to the first print line.
Fanfold
Bottom
0, 1/6, 1/4, 1/3, 1/2, 2/3,
3/4, 1, Define
Define the separation in inches from the bottom
edge of a fanfold to the last print line.
Fanfold Left
Mrg (1.00mm)
-7, -6, -5, -4, -3, -2, -1, 0,
1, 2, 3, 4, 5, 6, 7, Define
Compensation value added to Fanfold Left Mrg.
Fanfold Top
Mrg (0.01”)
-7, -6, -5, -4, -3, -2, -1, 0,
1, 2, 3, 4, 5, 6, 7
Compensation value added to Fanfold Top.
Fanfold Auto
Load
No, Yes
Yes: The printer loads paper to the first printing
position automatically when using fanfold.
No: Press the【Load/Eject】key to load paper
when using fanfold.
Skip
No, Yes
Skips printing on perforation area.
Only valid to fanfold.
Yes: Blank lines between 2 pages.
No: No blank lines between 2 pages.