Tally Dascom 5130P - User Manual

Questions and Answers

J
Joseph McintyreAug 19, 2025
What to do if Tally Dascom 5130P is on but not printing?
- M
  melody16Aug 20, 2025
  First, ensure that the Offline indicator is off. If you are using an interface cable, check that it's securely connected to both the printer and the computer. Verify that paper is loaded correctly. Then, run the printer Status Page to see if printing executes normally. If it does, the issue likely stems from the interface, the computer, incorrect printer settings, or incorrect software settings. Lastly, confirm that the printer driver selected in your software matches the emulation selected on the printer.
S
Seth JonesAug 21, 2025
Why is my Tally Dascom 5130P Printer printing wrong characters?
- S
  Steven RiveraAug 21, 2025
  First, ensure the interface cable is securely connected to both the printer and the computer. Second, verify that the printer driver selected in your software matches the emulation selected on the printer. Also, check the length of the interface cable, ensuring it doesn't exceed 2 meters for Parallel & USB connections. Finally, try using another interface cable to rule out any cable issues.
C
clarkrachaelAug 23, 2025
What to do if Tally Dascom 5130P Printer paper jams while printing?
- J
  Joseph CampbellAug 23, 2025
  Turn off the Tally Dascom printer and carefully remove the jammed paper. Clear any obstructions from the paper path. If you're using continuous forms, ensure that both the incoming and outgoing paper stacks are correctly placed so the paper feeds straight.
J
Joseph PetersonAug 26, 2025
Why Tally Dascom 5130P Printer power does not turn on?
- L
  Luis CrossAug 26, 2025
  First, check if the mains voltage is correct for your Tally Dascom printer. Ensure the power cord is securely connected to both the printer and the mains power outlet, and verify the outlet is functional by testing with another device. If it's still not working, turn the power off, wait a minute, and then turn the printer back on. If the printer still has no power, contact your dealer.
C
Chad HaydenAug 27, 2025
What to do if Tally Dascom 5130P Printer paper jams while loading?
- R
  Rachel ThomasAug 27, 2025
  Turn off the Tally Dascom printer and remove the jammed paper. Remove any obstructions from the paper path. Make sure that the paper is not folded, creased, or torn. Ensure that the left and right tractors are set so that the continuous forms are stretched taut.
W
williamsteresaAug 29, 2025
How to fix light or dark printing on Tally Dascom Printer?
- K
  kcampbellAug 30, 2025
  Ensure that the ribbon cartridge is properly installed in your Tally Dascom printer and that the ribbon feeds smoothly. If the issue persists, replace the ribbon.
C
carolrandolphAug 31, 2025
Why does my Tally Dascom Printer leave smears on the page?
- D
  Debra DavisAug 31, 2025
  Check the Tally Dascom printer ribbon for wear and replace it if necessary. Also, check if the tip of the print head is dirty and clean it with a soft cloth if needed. If the problem continues, the print head may need replacement.
C
Christine GarciaSep 3, 2025
How to load paper into Tally Dascom 5130P?
- E
  Erin PhillipsSep 3, 2025
  Make sure that the paper select lever located on the top right of the Tally Dascom printer is set correctly. Move the lever to the front for single sheets or to the rear for continuous forms. Also, ensure that the paper covers the paper-out sensor.
D
Diana MayoSep 4, 2025
Why Tally Dascom 5130P printing blank pages?
- L
  Lori CoxSep 4, 2025
  Ensure that the ribbon cartridge is properly installed in your Tally Dascom printer. Also, make sure the gap lever is set correctly.
C
Christopher WoodardSep 6, 2025
How to adjust the top margin on Tally Dascom Printer?
- M
  Morgan FisherSep 7, 2025
  Check the application's top margin setting. If needed, adjust the Top Margin setting in the Page Setup menu of your Tally Dascom printer.