Tally Dascom 5130P - Specification

T
ally Dascom 5130P
39
8 Specification
Print System
Monochrome serial impact dot matrix
Print Technology
Uni-/bi-directional logic seeking for text and graphics
Print Speed
Pitch HS Draft* Draft HS-LQ ( C PS/ DPI )
10 CPI 400 CPS 300 CPS 200 CPS 100 CPS
12 CPI 360 CPS 240 CPS 120 CPS
15 CPI
17.1 CPI
20 CPI
*limited print w i dth of 8.4inch
Font Matrix
Pitch HS Draft Draft HS-LQ (Matrix/DPI)
10 CPI 8x8/80H 12x24/120H 18x24/180H 36x24/360H
12 CPI 10x24/120H 15x24/180H 30x24/360H
15 CPI 8x16/120H 24x12/180H 24x16/360H
17.1 CPI 10.5x24/180H 21x24/360H
20 CPI 9x24/360H 18x24/360H
Proportional Nx24/360H Nx24/360H
Print Head
Number of pins: 24 pins
Firing frequency: Normal mode: 1800 Hz
Pin d i a m ete r : 0.25 mm
Life: 400
million strokes/pin @ Draft mode
Graphics
Horizontal: 1/60, 1/72, 1/80, 1/90, 1/120, 1/180, 1/216, 1/360
Vertical: 1/180, 1/360
Paper
Feed Speed
Form Feed: 18 IPS (Inches per second)
Continuous FormFeed: 15 IPS (inches per second)
Resolution
360 x 360 DPI maximum
Printable
Columns
Characters per inch (CPI); Characters per line (CPL)
Tractor: Friction:
10 CPI: 82 CPL 10 CPI: 94 CPL
12 CPI: 94 CPL 12 CPI: 112 CPL
15 CPI: 123 CPL 15 CPI: 141 CPL
17.1 CPI: 140 CPL 17.1 CPI: 161 CPL
20 CPI: 164 CPL 20 CPI: 188 CPL
24 CPI: 225 CPL