Tally Dascom 1225 - User Manual

Questions and Answers

J
Jennifer ClarkAug 20, 2025
What to do if my Tally Dascom 1225 is on but won't print?
- M
  Morgan GreeneAug 20, 2025
  If your Tally Dascom printer is on but not printing, ensure the Online indicator is lit. Verify the interface cable is securely connected to both the printer and computer. Confirm paper is loaded. Run the printer Status Page to see if printing executes normally, if it does, the issue likely stems from the interface, computer, incorrect printer settings, or incorrect software settings. Also, check that the printer driver selected in your software matches the emulation selected on the printer.
M
mitchellvalerieAug 22, 2025
Why won't my Tally Dascom 1225 power on?
- J
  Jade ArnoldAug 22, 2025
  If your Tally Dascom printer isn't powering on, first check if the mains voltage is correct. Ensure the power cord is securely connected to both the printer and the mains power outlet and that the power outlet is functional. Try another outlet if necessary. Turn the power off, wait a minute, and then turn the printer on again. If it still has no power, contact your dealer.
D
David JosephAug 25, 2025
How to fix paper jams while printing with Tally Dascom Printer?
- R
  Robert TorresAug 25, 2025
  If your Tally Dascom printer is experiencing paper jams during printing: * Turn off the printer and carefully remove the jammed paper, clearing any obstructions from the paper path. * Make sure that the Print Gap lever is set appropriately for the thickness of your paper. * For continuous forms, ensure that both the incoming and outgoing paper stacks are correctly positioned to allow straight paper feed.
J
Juan MartinAug 26, 2025
Why is my Tally Dascom 1225 printing the wrong characters?
- B
  Benjamin CruzAug 26, 2025
  If your Tally Dascom printer is printing erratically or outputting the wrong characters, ensure the interface cable is securely connected to both the printer and the computer. Verify that the printer driver selected in your software matches the emulation selected on the printer. Check the length of the interface cable (maximum 2 meters for Parallel & USB). Try using a different interface cable.
A
Amanda WiseAug 28, 2025
What to do if Tally Dascom 1225 paper jams while loading?
- C
  charlesscottAug 28, 2025
  If your Tally Dascom printer is jamming paper during loading, turn off the printer and remove the jammed paper, clearing any obstructions from the paper path. Ensure the Print Gap lever is set for the thickness of your paper. Make sure the paper is not folded, creased, or torn. For continuous forms, ensure the left and right tractors are set so the forms are stretched taut.
D
Donna HeathAug 30, 2025
How to adjust print darkness on a Tally Dascom Printer?
- D
  Dennis KingAug 30, 2025
  To adjust the print darkness on your Tally Dascom printer: * Make sure that the ribbon cartridge is properly installed and that the ribbon feeds smoothly. * Replace the ribbon if necessary. * Make sure that the print gap lever is set for the thickness of your paper.
B
Bradley PierceAug 31, 2025
Why is my Tally Dascom 1225 printing blank pages?
- G
  Gary BaileySep 1, 2025
  If your Tally Dascom printer is producing blank pages, make sure that the ribbon cartridge is properly installed. Also, ensure the gap lever is set correctly.
A
Andrew LaneSep 2, 2025
How to remove smears from Tally Dascom 1225 output?
- J
  Julie MendozaSep 2, 2025
  If smears and stains are appearing on the pages printed by your Tally Dascom printer: * Make sure that the print gap lever is set for the thickness of your paper. * Check for ribbon wear and replace the ribbon if necessary. * Check whether the tip of the print head is dirty and clean it with a soft cloth if needed. * The print head may need to be replaced.
P
Peter GarciaSep 4, 2025
How to adjust the top margin on my Tally Dascom 1225?
- J
  Jeffery SanchezSep 4, 2025
  To correct the top margin on your Tally Dascom printer, check the application's top margin setting. If necessary, adjust the Top Margin setting in the Page Setup menu.
A
Andrea CameronSep 6, 2025
How to fix vertically misaligned printing on Tally Dascom 1225 Printer?
- K
  kimberly17Sep 6, 2025
  To correct vertically misaligned (jagged) printing on your Tally Dascom printer, use the printer's vertical alignment function to check the vertical print alignment. If necessary, adjust the print alignment.

Summary

Setting Up the Printer

Install Printer Ribbon Cartridge

Step-by-step guide to install or remove the printer's ribbon cartridge.

Connect Feeder and Interface Cables

Connect Power and Install Drivers

Procedure for connecting power and installing necessary printer drivers.

Paper Installation Guide

Adjust Print Gap Lever for Paper

How to adjust the print gap lever for different paper thicknesses and copy counts.

Printer Setting Changes

System Setup Configuration

Print Setup Configuration

Page Setup Configuration

Maintenance Procedures

Printer Cleaning and Vacuuming Guide

Steps for cleaning the printer's exterior, interior, and print head carriage.

Paper Roller Cleaning Instructions

Troubleshooting Common Issues

Print Quality Problem Solutions

Diagnosing and fixing issues related to print darkness, smears, and alignment.

Paper Handling and Operating Problem Solutions

Troubleshooting paper jams, loading errors, and operational failures.

Interpreting LED Error Indications

Interpreting LED patterns to identify printer errors and failures.

Diagnostic Functions and Firmware Update

Printer Diagnostic Functions Overview

Character Sets and Code Pages

Character Set Tables and Graphics

Code Page Commands and Tables Reference

Control Codes and Emulation

Epson Emulation Command Reference

Comprehensive list of control codes for Epson emulation mode.

IBM Emulation Command Reference

Comprehensive list of control codes for IBM emulation mode.

Tally Dascom 1225 Specifications

General

Type	Dot Matrix Printer
Print Technology	Impact
Print Width	80 columns
Print Resolution	360 x 360 dpi
Paper Size	A4
Paper Handling	Friction feed
Interface	Parallel
Noise Level	55 dB
Number of Pins	24-pin