Tally Dascom 1125+ - Error Indications on Leds; Diagnostic Functions

Tally Dascom 1145/1125+
58
8.5 Error Indications on LEDs
Error Description
Power LED
Font1 LED
Font2 LED
Online
LED
Buzzer Sound
Print head too hot
Flashing
No change
No change
Flashing
None
Paper path
switching problem
Flashing
No change
No change
Flashing
Continuous
Paper jam
Flashing
No change
No change
On
Once
Paper End
Flashing
No change
No change
Off
Once
Carriage initial
position
Off
Off
Flashing
Flashing
Continuous
Code Stripe
problem
Off
Off
Flashing
Flashing
Continuous
Paper sensor
failure
Flashing
No change
No change
Off
Once
Paper width
problem
Flashing
No change
No change
Off
None
Print head
thermal sensor
failure
Off
Off
Off
Flashing
None
8.6 Diagnostic Functions
The printer diagnostic functions are Self-Test page, hex-dump mode and print alignment
adjustment.
 Self-Test page: Tells you whether the printer hardware is functioning correctly. If the printer
hardware is functional, any problems you are having are probably caused by incorrect
printer settings, incorrect software settings, the interface, or the computer.
 HEX-DUMP MODE: Allows you to determine whether the computer is sending the correct
commands to the printer, and whether the printer is executing the commands correctly.
This function is useful to programmers or others who understand how to interpret hex
dumps.
PRINTING ALIGNMENT ADJUSTMENT: Allows you to check and, if necessary, correct the
printer’s vertical line print alignment in bi-directional mode.
For details on using these functions, please refer to chapters 4 and 5.