Printer at a glance
Inserting ribbon cassette
Switch on the printer. Open top cover. Move green friction
tabs to the left and right and raise friction mechanism.
Raise green insertion
tongue A.
Remove green protections A and B. Insert green ribbon
tension knob and tense ribbon by turning knob in the
direction of the arrow.
Slightly tilt ribbon cassette
forwards and thread in
ribbon between green
insertion tongue and ribbon
support (transparent plastic
plate). Align and insert
cassette into guides on the
left and right. Press down
until it clicks into place.
Press down green insertion tongue A. Move print head
carriage back or forth and the ribbon motor will start to thread
and tense the ribbon automatically. Press friction mechanism
down until it clicks into place. Close top cover.
Quick Start Guide
2810/2820
Quick Start Guide
This guide provides information on the daily use of the printer. For additional information, please refer
to the User Guide on CD-Rom, delivered with the printer.
To Next Page
Need help?
General
