Tascam iU2 - Specifications; Analog Input;Output Ratings

28 TASCAM iU2
Analog input and output ratings
MIC 1 input (INPUT L) 8
INPUT L switch set to MIC
Balanced
Connector: 6.3 mm (1/4”) TRS standard jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 2.2 kΩ
Nominal input level: –63 dBu to –17 dBu
Maximum input level: –1 dBu
MIC 2 input (INPUT R) 8
INPUT R switch set to MIC
Balanced
Connector: 6.3 mm (1/4”) standard TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 2.2 kΩ
Nominal input level: –63 dBu to –17 dBu
Maximum input level: –1 dBu
Line L input (INPUT L) 8
INPUT L switch set to LINE
Balanced
Connector: 6.3 mm (1/4”) standard TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 10 kΩ
Nominal input level: –38 dBu to +8 dBu
Maximum input level: +24 dBu
Line R input (INPUT R) 8
INPUT R switch set to LINE
Balanced
Connector: 6.3 mm (1/4”) standard TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: 10 kΩ
Nominal input level: –38 dBu to +8 dBu
Maximum input level: +24 dBu
Guitar input ( 8 )
INPUT L switch set to GUITAR
Unbalanced
Connector: 6.3 mm (1/4”) standard TS jack
(Tip: HOT, Sleeve: GND)
Input impedance: 1 MΩ
Nominal input level: –55 dBV to –12 dBV
Maximum input level: +4 dBV
Line output (LINE OUT L/R) 8
Unbalanced
Connectors: RCA pin jack
Output impedance: 100Ω
7 – Specifications