Cautions on installation
The unit’s nominal operating temperature
•
is between 5° and 35° C (41° – 95° F).
Do not install in the following types of
•
places. Doing so could degrade the sound
quality and/or cause malfunctions.
Places with significant vibrations or that
•
are otherwise unstable
Near windows or other places exposed
•
to direct sunlight
Near heaters or other extremely hot
•
places
Extremely cold places
•
Places with bad ventilation or high
•
humidity
Very dusty locations
•
Make sure that the unit is mounted in a
•
level position for correct operation.
Do not place any object on the unit for
•
heat dissipation.
Avoid installing this unit on top of any
•
heat-generating electrical device such as a
power amplifier.
Beware of condensation
If the unit is moved from a cold to a warm
place, or used after a sudden temperature
change, there is a danger of condensation;
vapor in the air could condense on the
internal mechanism, making correct
operation impossible. To prevent this, or if
this occurs, let the unit sit for one or two
hours at the new room temperature before
using.
Cleaning the unit
To clean the unit, wipe gently with a soft dry
cloth. Do not use any benzene, paint thinner,
ethyl alcohol or other chemical agents to
clean the unit as they could damage the
surface.
1 – Introduction
To Next Page
Loading...
