9-30
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 "User Login Setting" [Next] > "ID Card Settings" [Next]
2
Configure the settings.
The following settings can be selected.
This functions appears when the Card Authentication kit is activated.
Optional Applications (page 11-7)
This function does not appear when the user logs in as a network authentication user.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
Keyboard Login When ID card authentication is enabled, select whether or not
login by keyboard is allowed.
Value: Permit, Prohibit
Additional
Authentication
*1
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in
"Network Authentication".
Select whether or not to require password entry after
authenticating by ID card.
Value: Off, Use Password, Use PIN Code
Model Name Login User Name Login Password
TASKalfa 3011i 3000 3000
TASKalfa 3511i 3500 3500
To Next Page
Loading...
